How To Disinfect Carpet Without Steam Cleaner: 5 ways

Sometimes a simple vacuum will not be enough to disinfect carpet without steam cleaner- you need to cleanse your rug from time to time. Even the best preserved homes need good deep cleaning from time to time to maintain good hygiene and a shiny look.  The great solution is to disinfect your rug, keep it bright and germ-free using these steps – you don’t need a steam cleaner!

Vacuum cleaners are effective in removing dust and crumbs on the carpet.  While the vacuum works well in daily carpet cleaning, it does not sterilize.  This means that although the rug is free from dirt and crumbs, it is not bacteria-free.  Sometimes you must incorporate a sterile routine that kills any dirt or bacteria present in the carpet.

When you don’t have enough budget to buy or rent a steam cleaner, the first thing that comes to your mind is that deep clean carpets are not possible.  In fact, there are many ways you can deep cleaning your carpets without a steam cleaner.

Steam cleaning your carpets seems a great option for treating and cleaning these unpleasant spots.  However, buying or renting a steam cleaner is sometimes off-budget for some individuals.  Let’s show you how to do this without breaking your finger bank.

 

How To Disinfect Carpet Without Steam Cleaner

  1. Remove the furniture

If there is any furniture on the rug, you will have to remove it.  Clean the rug with vacuum to get rid of any debris or loose dirt.  Spread some baking soda on the carpet.  Let her stay there for a few minutes.

  1. Prepare warm water and cleaning solution

If you want to save money and clean your carpets in depth, you can use baking soda or natural soap.  If you decide to use baking soda, simply mix it with water and place it on the floor.  The same applies to soap, although you should use very small amounts of it.  If you use too much soap, it may be difficult to remove it from the carpet afterwards.  You will also need some type of brush to rub the carpet.

  1. Prepare sterilization mixture

Add vinegar and cold water in equal parts in a bucket, then add some liquid dish cleaners.  Rotate the bucket and its content until the mixture becomes foamed.  This mixture has the property of cleaning and disinfection, but it is also known to cause discoloration of some tissues.  So, use a small area of ​​carpet to test it first.  The mix works with many rugs, and most likely your exception will not be.

  1. Scrub the carpet

Get a bucket of warm water and put a little natural cleaning agent or soap in it.  Not much, otherwise the soap will never come out.  I like to use a little dish cleaner.  Frankly, it doesn’t matter how often you put it in the bucket because dirt will often be removed by warm water and rubbed.  Dip the brush in the bucket and rub it with a little water on the ground, not saturated, but enough to dab the carpet a little.

Do not soak your carpet once.  If this happens in error, you can use dry towels to remove excess water.  Next, start cleaning gently, one small area at a time.  You should be very careful, and the best way to do this is to clean small amounts every time.  You may need to change the water after a while depending on the size of the area you are cleaning and the amount of dirt.

  1. Rinse

Replace the mixture with clean, cold water and use a rag instead of a cleaning brush.  Dip the rag in the water and use it to rub the rug.  This will help remove bacteria and dirt that the disinfection factor has removed.  Just as you did with a wash, use a damp cloth to rub the rug from end to end.  Dip the rag into the water when necessary.  You can also change the cloth if it gets dirty.

  1. Let the carpet dry

It is advisable to clean and disinfect the rug on a dry day, or when the humidity is low, so it can dry faster.  If you have a fan, you can also use it to dry the rug.  Let the rug dry completely before moving on to the next step.

  1. Vacuum the carpet

This is not mandatory, as cleaning may sometimes be more than sufficient.  However, if you want to make sure your rugs are perfectly clean, you can clean them afterwards as well.  This will remove any additional dirt from it and give it a nice fresh look. The best vacuum cleaner for cleaning carpet is Kenmore Elite Pet Friendly 31150.  This vacuum  is not just perfect for carpet but also removes pet hair. it has excellent ratings on various websites.

No products found.


Samsung PowerBot R7065 Review

CONCLUSION

After you have sterilized your carpet, you may want to stay that way longer.  Whenever possible, try to keep dirt and any spills from your carpet.  From time to time, you can prepare a mixture of equal amounts of water and white vinegar and sprinkle this mixture on the carpet.  This is the best way to quickly disinfect your carpet without steam cleaner.

 

Please share this

Leave a Comment